Loading... Please wait...


Become a member

SB Ford GT40P Drop In Valve Springs Kit, Hyd Roller .580" Lift

  • Image 1
  • Image 2
  • Image 3
  • Image 4
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description


.580" Lift Valve Spring Kit for SB FORD GT40


Currently Out of Stock


However, our .560" lift spring kits for both GT40 and GT40P heads are available NOW!

To find the .560" lift kits, enter the appropriate number into our search:

Gt40P uses # VSK7i49

Gt40 uses # VSK7i48



For a limited time, while we're out of .580" lift kits, we will be offering $10.00 off on our popular high output .540" Mid lift valve spring kits. Regular price is $122.50, after applying the discount code, the kit cost will be reduced to $112.50 during check out.


The discount applies only to part numbers VSK7G49-M and VSK7G48-M which are both high output .540" lift kits for GT40 and GT40P heads.


This offer is limited to a maximum use of two times per customer and will end without advanced notice.


There will be more .580" lift kits coming in a few weeks but please note the spring manufacturers have raised the price of valve springs so the .580" lift kit price will increase in the near future but don't worry, we'll still have the best price and quality in the industry.

To get a $10.00 discount off a .540" kit, use coupon code: F44XI9L7X2 during check out. Just enter it into the coupon code box during check out. Discount is for online orders only.






Fits Factory Heads, no machining required.

High Performance, High Lift Valve Spring Kit for SB FORD GT40P

Application: Hydraulic Roller, up to .580" Lift

Fitment: GT40P, E7 and other 302 heads w/ .393"/.481" tip length valves


Our High Performance valve spring kits are specially engineered to suit SBF heads with staggered tip length valves, including GT40P and E7 heads.

Unlike some of the earlier SB Fords where the valve tip lengths were the same for both intake and exhaust, GT40P heads use two different lengths.

They normally have .393" tip length intakes and .481" tip length exhausts.

Since the goal is to use the same high performance springs on all sixteen valves, a special retainer and lock combination is are required.

Our drop in valve spring kit is engineered to fit these heads with outstanding results.

The kit comes with locks which are marked for Intake and Exhaust.

Our performance springs fit GT40P heads without additional modifications, no machine work required. Just set up the installed heights and assemble.

Designed for mild to moderate high performance Hydraulic Roller cams, our kit will handle most cams up to around 232 degrees duration @ .050".

If you need help determining if these will work with your cam, just send us an e-mail with the cam specs or better yet, the cam brand & part number and a link to the specification page. We'd be happy to verify compatibility.

Works great with many of today's popular Motorsport, Trick flow, Comp & Lunati performance cams.

Suitable for 1.6 and 1.7 ratio rocker arms as long as the lift does not exceed .580"


      Spring Specifications:

  • Spring Type- HP Single w/ Damper
  • Machine work required?- NO
  • 1.460" Outside Diameter
  • I.D.- Fits over stock 1.00" register step
  • 128 Lbs @ 1.790" Valve Closed Installed Height (*see Note 2 below)
  • 280 Lbs @ .500" Lift
  • 308 Lbs @ .580" Lift



     Kit includes:

  • Package of eight intake retainers & locks.
  • Package of eight exhaust retainers & locks
  • 16 Drop in High Performance valve springs
  • Specification Sheet
  • Installed height diagram (as shown in picture above)




  • GT40P heads normally have .393"/.481" tip length valves
  • This kit comes w/ parts to fit .393" & .481" tip length valves using Hyd Roller.


 Our GT40P spring kits are top quality and priced low.

Excellent valve control w/ High Performance cams up to 234 degrees duration @ .050".

Applications with larger cams should consider one of our other kits, there are several to choose from.


Requirements- Measure valve spring height during installation. For more information on setting up valve spring installed height, read the information we has available under the "Valve Spring Shims" category.

Buyers can add: Shims and/or Seals by checking the boxes to the right of the pictures. These items are added in at slightly discounted prices with reduced shipping rates. Although we also offer std shims, we recommend using hardened shims with this kit. Please note our viton valve seals are premium OE style replacement seals which are far superior to gasket set seals.


*Note: Customers running mild cams up to .480" lift including the stock cam with 1.6 or 1.7 ratio rockers can check our "A" kits. Enter VSK7A49 for GT40P and VSK7A48 for GT40 into search to view details.

*Note2: Kit installed height may differ from advertised spec listed above. Each kit comes with it's own installed height specification card. Please use the installed height specifications included with your kit.

Note3: This item is currently not available for Flat Tappet cams. Order for hyd roller only.


Alex's Parts- The smart choice in valve train parts~

Find Similar Products by Category