To suit: FORD 427 Tunnel Port Engines

SS VALVES, FE 427 w/ 2.250"/1.750" Valves

Application: FE Ford

Fitment: 427 tunnel port.

 
Here we have a set of Sixteen Stainless Steel Race Valves for 427.

For a limited time, we will offer a few different versions of FE 427 stainless steel valves.

This one is for: 2.250" intakes and 1.750" Exhaust valves. In this set, both valves are tulip shaped with 30 degree intakes and 45 degree exhausts.

In our other 427 valve listings, we will offer sets with a 2.190"/1.750" tulip shape, 30 degree intake and 45 degree exhaust, followed by two additional versions with 45 intakes instead of 30. The intake valve profile of the 45 degree intakes are more of a nail head design with a smaller cup on the top of the valve head. Some folks will use 45 degree nail head intakes to acquire additional compression so we're working on offering sets in 2.190"/1.750" and 2.250"/1.750" both size sets with either tulip shape (30 degree) and nail head shape (45 degree) intakes. All sets have the same 1.750" 45 degree tulip exhaust valve.

Purchase quantity one for all sixteen valves.

This version: FE Ford, 427 w/ 2.250" (30 degree) and 1.750 valves.

Includes- Eight 2.250" Intakes & Eight 1.750" Exhaust valves.

      Specifications:

• IN- 2.250" X 3/8" stems X 5.445" w/ .321" tip length. Std O.A.L (this version w/ 30 degree intake face)
  
• EX- 1.750" X 3/8" Stems X 5.435" w/ .321" tip. Std OAL
• IN- 30 degree face angle
  
• EX- 45 degree face angle
  
• Undercut - Jet Flow underhead area
• Swirl Polished
• Exhaust Valves, 21-4N Stainless Material
  
• Intake Valves, 21-4N Stainless Material
  
• Hard Chromed Stems
• Suitable for high spring pressures
  

Other 427 valve set versions coming soon.

1.725" Exhaust valves are available special order.

Don’t forget to order valve seats, FE heads normally need them on the exhaust.

Alex’s Parts- the smart choice in valve train parts~