Loading... Please wait...

Categories

Become a member


VALVE SEATS, 1.812" x 1.562" x .219" UNIVERSAL, 427 FORD

  • Image 1
  • Image 2
Price:
$20.00
Shipping:
Calculated at checkout


Product Description

High Chrome Alloy Steel, 1.812" x 1.562" x .219"

Hard Valve Seats, set of eight

Application: Universal Unleaded Retro fit, Tapered ID

 

 

     Common applications:

  • Buick, Chevy, Pontiac, Olds, AMC 151/2.5 Iron Duke Intake w/ 1.720" (Pontiac engine)
  • Ford 427 w/ 1.725-1.750" exhaust & BB Ford w/ 1.750"/1.760" Exhaust
  • Select Iron heads w/ 1.710"-1.770 exhaust
  • Includes eight seats for the listed price

 

Use for unleaded fuel conversion or to repair damaged or sunk seats in OEM cast iron heads.

Our current iron head valve seat inventory comes from either Manley or Qualcast.

This size seat is from Qual Cast. Part Number: 20-1812-4

If you're looking for a seat we don't have listed, send us a message and we'll check if they are available.

High Chrome Alloyed Seats are intended for unleaded fuel.

Chrome alloy seats easily machined on modern seat and guide machines or ground using stones. (Sioux, Kwik way, etc)

Tapered ID seats areusually intended for shops using stones but can be cut also.

Most retro fit seats are available in increments of 1/16".

The listed outside diameter of the seat is the cutter size to use on the head.

The seat itself will have the proper press for an iron head added to it's outside diameter.

Example: A seat with a listed OD of 1.500" will measure around 1.5045"-1.506" so it will have around .0045"- .006" press fit if installed into a 1.500" counter bore.

    

     Sizes:

  • Outside Diameter: 1.812" Plus Press of .0045"-.006"
  • Inside Diameter: 1.562"
  • Depth" .219"
  • Radiused leading edge for ease of installation
  • Suggested press fit for iron head- .0045" - .006"

  

 

     Material:

  • Qual Casts "Q" Material, High Chrome Alloy Steel
  • Hardness- RC40 combined with easily machinability
  • Features excellent resistance to high temperatures in application to 1150 degree F
  • Can be Machined w/ carbide or Ground w/ stones

 

 

If you can't find what your looking for, send us a message.

Tech Notes-

  • Intake seats do not need to be changed to run unleaded fuel, only exhaust
  • Iron heads which came from the factory with seats usually require special size replacement seats.
  • Aluminum heads also use special size seats. Their depth is usually much deeper then unleaded retro fit seats. 
  • Aluminum heads commonly use depths between .312"-.437"
  • Propane applications require Hi Nickel / Tunston Alloy seat. If you're looking for specially hard seats inquire via message.
  • Aluminum heads require more press fit then iron. Usually around .007"

Alex's Parts- The smart choice in valve train parts~


Find Similar Products by Category