Loading... Please wait...


Become a member

6.320", Hardened Pushrods, +.070" Length, GT40, GT40P, E7, SB FORD 302 HO, Hyd Roller, Oversize Length

  • Image 1
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

  +.070" Longer then stock

Hardened Pushrods, 6.320", Heavy Wall- 5/16" X .075" Wall X 6.320" Length

Application: 302 FORD w/ Factory Hyd Roller Lifters. GT40, GT40P, HO 302, E7


 These oversize length hardened pushrods are a great choice for high performance 302 engines.

Can be used with either stock pedestal mount rockers, pedestal mount roller rockers or with stud mount arrangements using guide plates.

Specially manufactured to our specifications, these custom made pushrods can only be ordered from us. They are an Alex's Parts exclusive!

Manufactured from heavier wall thickness material, these HP pushrods can be run with increased spring pressures including our high performance valve spring kits.

Since many aftermarket Hyd Roller cams utilize lobes with a small base circle, longer pushrods are required to make up for their reduced diameter.

Longer pushrods are required with reduced base circle cams.

These pushrods will produce .070" more lifter pre-load than stock 6.250" long pushrods.



  • Purchase is for a set of Sixteen
  • +.070" Longer than stock 6.250" hyd roller pushrods
  • 6.320" End to end measured Length
  • Heavy wall thickness, .075" wall
  • 5/16" Diameter
  • Carbo Nitrided 1010 steel, works with guideplates
  • Black Oxide Finish
  • Welded Ball Ends
  • Suitable for many aftermarket performance valve springs
  • Manufactured in the USA
  • Tighter tolerances than the industry standard (Run out and length)


These are an excellent value, only available here!




Alex's Parts- The smart choice in valve train parts~


Find Similar Products by Tag