Loading... Please wait...

Categories

Become a member


VALVE GUIDES, HARDENED CAST IRON, 3/8" x 2.625" x .502" UNIVERSAL

  • Image 1
  • Image 2
Price:
$24.50
SKU:
30-9964H
Shipping:
Calculated at checkout


Product Description

 Universal Fit, .502" O.D. Guides

Hardened Cast Iron Valve Guides, 3/8" X 2.625" Long

 

These are from our Hardened Cast Iron valve guide line.

Hardened Cast Iron guides have a spiraled ID which goes through the guide around 75% of the length.

Hardened guides require a few extra procedures during installation but once properly installed and when mated with hard stem valves, (chrome and nitrided [melonite]), their wear resistance is outstanding!

Hardened guides should be given a carbon cut on all exhausts. This is done on the chamber side of the guide on the exhaust only. Intakes just get a chamfer on both ends and the exhaust gets a chamfer on the top side also. Carbon cuts are commonly done using a guide liner cutter/reamer or a reamer for oversize valves. .015"-.030" over is fine.  Just cut into the guide around .150"-.225" deep.

Hardened guides should be cleaned with a spinning nylon brush and cleaning solvent before assembly. Proper cleaning is very important. Any hardened debris hiding in the spiral groove can lead to galling and other forms of guide failure.

When hardened guides became more common, we had to learn the hard way about these extra details.

We're offer these tips to aid in your sucessful installation.

Once properly installed and prepped, hardened guides have the highest resistance to wear of all guide materials.

This type of guide is used in heads which have "integral" guides. This means the guides are part of the casting and are not removable.

Heads are set up in a "Seat and Guide Machine" and each guide is core drilled, then reamed to .500".

Guides are then pressed or "driven" into place. Any extra length is then spot faced to fit.

In our shop, after the guides are installed, we take a .500" valve seal cutter to clean up any old remaining guide material from the seal side of the guides so .500" Positive seals could be installed, as well as the removal of any remaining, thin-wall iron material.

If needed, guide inside diameters are then fitted by honing w/ Sunnen tooling.

     Specifications:

  • .502" Outside Diameter
  • 2.625" Overall Length
  • .373" Inside Diameter
  • Spiral ID: YES
  • Plain ID: NO
  • Material- Cast Iron, Hardened
  • Manufacturer- Qual Cast
  • Quantity included in purchase- sixteen guides

We carry several different types of valve guides, both in Cast Iron and Bronze. Hardened Cast Iron guides come in limited sizes.

Looking for something different? Write with your request.

TECH NOTE: Aluminum heads always have some form of guide inserts. This type of guide is not intended for such heads. Applications w/ aluminum heads normally require replacement guides in the same type. If you're looking for replacements for aluminum heads, write to us and we'll advise. This site is in a constant state of construction, we offer way more then what is shown here.

 

    Alex's Parts- The smart choice in valve train parts~


Add to Wish List

Click the button below to add the VALVE GUIDES, HARDENED CAST IRON, 3/8" x 2.625" x .502" UNIVERSAL to your wish list.

You Recently Viewed...