Loading... Please wait...


Become a member

Valve Spring Kit GT40 w/ stock cam w/ Turbo or Supercharger, low lift applications- .440"-.500" Lift

  • Image 1
  • Image 2
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

Fits Factory Heads, no machining required.

Drop in Spring kit for up to: .500" Lift, Turbo or Supercharger

Application: SB Ford w/ GT40 Heads


Since it's initial 2006 release, our drop in SB Ford spring kits have been a smashing success. Over the past few years, we've noted an increasing number of customers interested in a spring kit for lower lift applications, some running low lift cams as well as the stock HO camshaft.

Works for low cam lifts- Between .440"-.500"

Good for the stock HO cam with a turbo or mild supercharger. (6-10 Lbs boost ok)

Heavy Duty Spring w/ damper fits the stock GT40 spring base perfectly.

As with our other GT40 kits, this one works with the stock staggered tip length configuration.

Comes with Springs, Chrome Moly steel retainers and hardened locks. Retainers and/or locks are marked for Intake and Exhaust positions.

Fits factory iron GT40 heads without the need for machine work. Just set up the installed heights and assemble.

This kit requires shims to establish target installed heights. (use check box towards top of page)

For those running aftermarket valves w/ .393" tip lengths on both, intake and exhaust can select the .393"/.393" option.


      Spring Specifications: (Averaged)

  • Spring Type- Heavy Duty Single w/ Damper
  • Machine work required?- NO
  • 1.480" Outside Diameter- fits factory castings
  • Fits over stock .995" register step
  • 134 Lbs @ 1.740" Valve Closed Installed Height (use installed height spec included with your kit)
  • 310 Lbs @ .500" Lift



     Kit includes:

  • 16 Retainers and lock sets. Parts are labeled for intake and exhaust.
  • 16 Drop in performance springs
  • Specification sheet
  • Installed height diagram w/ target installed height



Requirements: As with any aftermarket performance spring kit, proper installation requires measuring the installed heights and adding shims as needed to obtain the target installed height as shown on the spec card included with your specific kit.

Buyers can order shims and or or seals by checking the boxes at the right of the pictures at the top of the page. These items are added in at slightly discounted prices with reduced shipping rates.

Please note the Viton seals we carry are the absolute best SB Ford seals available today. They have a ribbed ID which improves ease of installation which also seals better around the guide ID.



Alex's Parts- The smart choice in valve train parts~

Find Similar Products by Category